Walchem WebAlert Instruction Manual download pdf (Page 39)

Send Email Via

If you have both a modem card and an Ethernet card installed, click on the radio button of which you

need to use to send an email notification of an alarm condition, or an automatic report.

Email and Text Message Server Settings

SMTP IP Address

In order for the controller to send an email, the email must first be routed to the SMTP IP address that

the Internet Service Provider specifies. Obtain this address from your ISP and type it into the text box.

SMTP Port

If the SMTP server being used requires a different port than the standard port 25, enter that in the text

box.

ASMTP Settings

ASMTP User Name

Type in the user name required for authenticated SMTP emails.

ASMTP Password

Type in the password required for authenticated SMTP emails.

Use ASMTP for email

Check the box if your Internet service provider requires authenticated SMTP for its emails.

Communications Status

Gateway Access (VNet activations only)

This field is for information and displays if the controller is connected to the remote server or not and

when the connection was made.

Connection Status

This menu is informational only, and tells you what is happening with the Internet connection. Possible

status messages vary with the type of connection and include:

Message Explanation

 Off Line The controller is not connected.

 Dialing xxx-xxxx The controller is dialing out to the ISP.

 No Dial Tone The controller can not dial out due to phone line or

modem problems.

 No phone number There is nothing entered in the ISP Phone No. field.

 Connecting to ISP The controller is successfully negotiating a

connection with the ISP.

 On Line The controller is now on the Internet.

 Checking for Upgrade The controller is communicating with our server to see

if a software upgrade is available.

 Connection Timeout in xxxxx sec Once the Internet connection process is complete.

The number of seconds displayed depends upon the value entered in the Connection

Lifetime text box described below.

Dynamic IP Address

This menu is informational only, and tells you the IP address of the last person to contact the controller.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

No comments

Walchem WebAlert Instruction Manual Page 39